Name: Tojiro DP 3-layer blade bunka 16 cm, F-795
Brand: Tojiro
SKU: TJF-795
Price: 1315 SEK
Availability: InStock
Rating: 10 (1 reviews)

Tojiro DP 3 layers Peeling Knife 9cm

notforsale

not_replaced_in

legal_agecheck_key

Tojiro sharpening stone grit 1000/3000 F-433

Tojiro sharpening stone grit 220/1000 F-432

Eden chopping board American Walnut EQP004-3736

Eden chopping board American Walnut EQP007-3525

Blade length: 16 cm 
Total length: 29.5 cm 
Weight: 190 grams

This **Tojiro DP 3 bunka** is enhanced with a kengata blade. This stands for 'sword-like' and refers to the suddenly sharply sloping end of the blade. Other than that the knife can be regarded as a member of the santoku family. With the narrow tip you can finely cut meat, fish and vegetables. Please note: not suited to cut through bones.


## Tojiro DP 3 blade


For knives there is always a compromise between hardness (sharp, but brittle and less stainless) and flexible (less sharp and less brittle, more stainless). Tojiro opted for a multi-layer construction. The core is made from VG10 steel surrounded by 13-chrome steel. This leaves you with a unique combination of hardness and a much higher corrosion-resistance than with carbon steel. 


## Tojiro DP 3 handle


The handle is made from black ECO. This is a combination of plastic and recycled wood. Sustainable and strong, won't easily bend and can handle wear and tear in the long run. The metal bolster is hygienic and ensures that dirt won't accumulate in between the blade and the handle. The handle is secured to the full-tang blade with three rivets.


## About Tojiro


Tojiro is one of the largest Japanese knife brands. This innovative brand has won numerous design awards. Traditional Japanese techniques are combined with modern production methods. The Tojiro kitchen knives are razor-sharp and very sustainable.



Tojiro DP 3-layer blade bunka 16 cm, F-795

brand

colour

series

handedness

blade_finish

blade_feature

kitchen_steel

handle_material

knife_edge_type

sharpening_type

sharpening_angle

delivered_as_a_set

kitchen_knife_type

value_number_of_knives

value_weight

value_blade_length

value_overall_length

expectedRestockDate

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Bellissimo coltello, bellissima lama, dimensioni perfette per le mie necessità unito al Kiritsuke da 21cm della stessa serie!

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

Tojiro DP 3-layer blade bunka 16 cm, F-795

Tojiro DP 3-layer blade bunka 16 cm, F-795

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Tojiro DP 3-layer blade bunka 16 cm, F-795

Tojiro DP 3-layer blade bunka 16 cm, F-795

Tojiro DP 3-layer blade bunka 16 cm, F-795

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Tojiro DP 3-layer blade bunka 16 cm, F-795

Related topics