DMT Diafold conical sharpening steel, FSKE

notforsale

not_replaced_in

DMT Diafold conical sharpening steel, FSKC

DMT Diafold two-sided sharpening stone, FWFC

DMT Diafold two-sided sharpening stone, FWEF

DMT Diafold two-sided sharpening stone, FWCX

DMT Diafold two-sided sharpening stone, FWEEE

DMT Diamond sharpening stone, coarse, W6C

DMT Diamond sharpening stone, extra fine, W6E

DMT Diamond sharpening stone, fine, W6F

Skerper Pocket Strop STP002, stropping paddle

DMT Diamond sharpening stone, extra coarse, W6X

Diamond conical sharpening steel for serrated knives. Grain size: fine.


Just like a Diafold sharpening stone this conical diamond sharpening steel has the design of a butterfly knife. The handle is folded around the diamond sharpening steel so it is protected when it is not being used. And thanks to the handle, the sharpening is very easy.  
  


With this sharpening steel serrated edges of, for example, a bread knife can be sharpened. Because of the conical shape, larger and smaller serrated edges can be sharpened. You use the part of the sharpening steel with the proper diameter. So, the top for smaller serrated edges and the heel of the steel for the larger serrated edges.  
  


Not only serrated knives but also other sharpened objects with curves, such as a spud-hook, can be sharpened with this sharpening steel.  
  

**Information about grain size DMT sharpening stones**
The grain size of a diamond stone and a water stone cannot be plainly compared. This is due to the fact that the construction and materials used are essentially different. In case of a water stone the sharpening grains are incorporated into the stone. These grains will be loosened from the stone during the sharpening process in the form of a kind of sharpening paste that arises. In case of a diamond stone, the diamonds are tightened into the surface of the stone.  
  

**Important to know**
You may choose for dry or wet sharpening with the sharpening stones by DMT. The advantage of wet sharpening is that the stone is lubricated and sharpening residues are disposed of. Only use water and never oil if you want to sharpen wet. In addition it is good to know that a diamond sharpening stone has to be used a couple of times in order to obtain the optimum sharpening result. The operation of a new sharpening stone is a little too coarse. Only after 5 to 10 knives the stone will obtain its definitive working.

DMT Diafold conical sharpening steel, FSKF

grit_general

stone_abrasive

handle_material

value_width

value_height

value_weight

value_rod_length

value_overall_length

grit_size_kato

brand

series

expectedRestockDate

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Deze slijpstaaf doet zijn werk prima. Het handvat voelt en ziet er wat zwak uit. Het gebruik voelt het prima aan. Het slijpen zelf geeft een prima resultaat. En daar gaat t om. Ik heb niet de indruk dat het handvat snel stuk zal gaan. 

Lijkt fragiel, is het niet, het is een stuk steviger dan het eruitziet.
Korrel 600 is perfect, je bent iets langer bezig maar het is gelijk goed geslepen.
Ik gebruik het alleen voor gekartelde messen.

orderNumber

reaction

reviewDate

ich schleife Messer mit Wellenschliff,bitte nicht vergessen den Grad abzuschleifen

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

value_diameter_min

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

value_rod_diameter

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

The material that gives the sharpening stone its abrasive effect. Diamond, ceramics (e.g. aluminium oxide or silicon carbide) or the materials in a natural stone. Read [more about the advantages and disadvantages of these materials](/en/ct/sharpening-stone-materials-which-are-the-best.htm).

Abrasive

stone_binder

The agent that brings all the abrasive particles in a sharpening stone together. The cohesive agent usually consists of natural products, such as cellulose, wax, clay and even magnesium, or synthetic products such as: polyacrylates, polyvinyl alcohol or various synthetic resins. The cohesive agent itself usually has no abrasive effect.

Cohesive agent

Material

The grain size a supplier gives to its sharpening stones. Please note: This can be either in FEPA-F (European), ANSI (American) or JIS (Japanese). Read [more about the different grain sizes here](/en/ct/expressing-grain-sizes-sharpening-stones.htm).

Grit according to supplier

sharprod_type

value_sharprod_grit

The grain size we give to a sharpening stone. We test all sharpening stones ourselves and add an appropriate grain size on the basis of this test. From extra coarse to ultra fine.

Reviews for DMT Diafold conical sharpening steel, FSKF

Reviews for DMT Diafold conical sharpening steel, FSKF

Reviews

Average rating

Reviews for DMT Diafold conical sharpening steel, FSKF