Name: Steel Will Piercer F40-01 Black G10, Linerlock pocket knife, Tommaso Rumici design
Brand: Steel Will
SKU: SWK-F40-01
Price: 965 SEK
Availability: BackOrder

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Skerper paddle strop Viking, rough, stropping paddle

Skerper Pocket Strop STP002, stropping paddle

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Fallkniven Diamond Ceramic Whetstone DC4

KME Precision Knife Sharpening System, R.P.S.H. Combo Kit, KF-CBO

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Nano-Oil 10w maintenance oil 8cc/8ml

Work Sharp Angle Set knife sharpener, WSBCHAGS

Lansky Masters Edge Sharpener, MEDGE1

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

Handle/blade: G10/D2
Blade length: 8.2 cm
Weight: 100 grams

The **Steel Will Piecer** is a stunning and practical EDC pocket knife, designed by Tommasco Rumici. With the Piercer this Italian designer has introduced a knife that is perfect for everyday use. The handle feels great in hand and the thin blade can be used for almost anything.

 Striking about the Piercer is that it is a relatively flat design. The total handle is only 12 mm thick. As such you hardly notice it in your pocket. And yet you carry a 8.2 cm blade with you. The pointed tip is practical for detailed jobs and the thin grind makes it perfect for preparing food. In terms of steel, D2 was chosen. This is a tough type of tool steel that retains its sharpness well. You do, however, need to be careful with long-term exposure to acids, salt and moisture when you handle D2. It is not 100% stainless. Fortunately you can easily clean it and occasionally add a drop of oil.

 You open the Steel Will Piercer with the thumb hole. When opened the blade is blocked by a solid liner lock. Because only one side of the handle has been enhanced with a liner, the Piercer weighs less than you might expect from a knife this size.

 The handle is made from G10. At the end of the handle you will find a deep-carry pocket clip. This clip makes sure that the knife can be stored deep inside your pocket. The clip can also be converted for left-handed use.



Steel Will Piercer F40-01 Black G10, Linerlock pocket knife, Tommaso Rumici design

Steel Will Piercer F40-61 Black G10, Framelock pocket knife, Tommaso Rumici design

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

expectedRestockDate

legal_agecheck_key

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Steel Will Piercer F40-01 Black G10, Linerlock pocket knife, Tommaso Rumici design

Steel Will Piercer F40-01 Black G10, Linerlock pocket knife, Tommaso Rumici design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Steel Will Piercer F40-01 Black G10, Linerlock pocket knife, Tommaso Rumici design

Steel Will Piercer F40-01 Black G10, Linerlock pocket knife, Tommaso Rumici design

Steel Will Piercer F40-01 Black G10, Linerlock pocket knife, Tommaso Rumici design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Steel Will Piercer F40-01 Black G10, Linerlock pocket knife, Tommaso Rumici design

Related topics