Name: Brisa Bobtail 80 bison micarta handle, 12C27 scandi, leather sheath 9955
Brand: Brisa
SKU: ENZ-9955
Price: 839 SEK
Availability: OutOfStock
Rating: 10 (1 reviews)

Handle/blade: micarta/12C27
Blade length: 7.5 cm
Weight: 75 grams

The **EnZo Brisa Bobtail 80** is a compact outdoor knife, designed for many different purposes. From gutting game to using it as a light-weight hiking knife. With its low weight of 75 grams it is namely the perfect companion to take with you wherever you might go.

 The blade made from Sandvik 12C27-steel is long enough to At the same time you are still close enough to the tip to still have a lot of control. A perfect combination. The 12C27 steel retains its sharpness well and is easy to sharpen. It is also relatively stainless and can handle quite a bit.

 The handle is made from micarta. This material is made from layers of canvas with epoxy which is compressed under high pressure. This leaves you with a very sturdy and beautiful handle material.

## From EnZo Knives to Brisa Knives

You might have been familiar with this product under another name: 'EnZo'. In 2019, however, EnZo decided to change its name to Brisa. The production, quality and the company behind the brand, however, remained the same. As such you still end up with the same good price-quality ratio you have grown accustomed to.



Brisa Bobtail 80 bison micarta handle, 12C27 scandi, leather sheath 9955

colour

Brisa Bobtail 80 Curly birch handle, 12C27 scandi, leather sheath 9949

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

Brisa Bobtail 80 mustard micarta handle, 12C27, leather sheath 9952

Brisa Bobtail 80 green micarta handle, 12C27, leather sheath 9958

brand

notforsale

not_replaced_in

expectedRestockDate

legal_agecheck_key

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Brisa Bobtail 80 bison micarta handle, 12C27 scandi, leather sheath 9955