Name: Bradford Guardian 3FE, 3D Natural Micarta Guardian 3 M390, Sabre Nimbus, False Edge 3FE-104N
Brand: Bradford Knives
SKU: BDK-3FE-104N
Price: 2283.8 SEK
Availability: InStock

Handle/blade: micarta/M390
Blade length: 8.9 cm
Weight: 95 grams

The **Bradford Guardian 3** is a practical fixed knife, perfect for small outdoor tasks. In addition, it is perfect as an EDC knife or while hiking. It might not be incredibly big, but it has a relatively long blade. As such you can use the compact Bradford Guardian 3 for more things than you might initially think.



The blade is made from Böhler M390 steel. This is an Austrian type of super steel. One of the best high-end choices at the moment. M390 excels when it comes to sharpness retention and corrosion resistance. The handle is made from micarta. A composite material from linen and synthetic resin.



This Bradford Guardian 3 comes in a leather sheath. It is enhanced with a belt loop to make sure you can carry it horizontally on your belt.



## Bradford Knives Guardian


Bradford Knives are made in the United States. In Kent, Washington, to be exact. It is where on a daily basis the most amazing knives are made from the best materials. The relatively good price is striking, especially considering the materials and the American production.



Bradford Knives is known for their massive amount of different combinations that can be made with their knives. This is the: **Bradford Knives Guardian 3 with sabre-grind, Nimbus finish M390 blade, swedge, 3D scales made from canvas micarta, black hardware and a leather sheath.**




Bradford Guardian 3FE, 3D Natural Micarta Guardian 3 M390, Sabre Nimbus, False Edge 3FE-104N

Bradford Guardian 3, Black G10 Guardian 3 M390, False Edge, Sabre Stonewashed 3FE-001-M390

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

Bradford Guardian 3FE, OD Green Guardian 3 M390, Sabre Stonewashed, False Edge 3FE-002

Bradford Guardian 3FE, Black Blue Guardian 3 M390, Sabre Stonewashed, False Edge 3FE-013

Bradford Guardian 3FE, Black Blue Guardian 3 N690, Sabre Stonewashed, False Edge 3FE-013-N690

Bradford Guardian 3FE, 3D Carbon fibre Guardian 3 M390, Sabre DLC, False Edge 3FE-114B

brand

zm_series

notforsale

not_replaced_in

expectedRestockDate

legal_agecheck_key

strike_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Bradford Guardian 3FE, 3D Natural Micarta Guardian 3 M390, Sabre Nimbus, False Edge 3FE-104N