Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

notforsale

not_replaced_in

productlabel

Skerper Pocket Strop STP002, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools #EveryDayCloth, micro-fibre cloth

FLEXXX STROPS Signature Field strop FLX01, pre-loaded

Work Sharp Multi-Sharpener Ken Onion Edition

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

Nano-Oil 10w maintenance oil 8cc/8ml

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Work Sharp Guided Sharpening System, WSGSS-G

Böker adhesive for screws 09BO753

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

Handle/blade: G10/Sleipner
Blade length: 10 cm 
Weight: 110 grams

The **ANV Z400** is an elegant pocket knife, made in the Czech Republic by Acta Non Verba Knives. The Z400 is a modern dagger knife. This knife, however, is enhanced with only one cutting edge! As such this pocket knife is legal to own. A nice detail is the Swiss Superluminova inlay in the guards. This material lights up in the dark and is often used for the dials of top-quality watches.


The Z400 has a handle made from G10 and a blade from Sleipner steel. This Austrian type of tool steel retains its sharpness well. Do, however, pay attention to the following: Sleipner steel is not completely stainless. So make sure you properly dry the knife after use. You open this knife with the flipper. When opened, the blade is blocked by a liner lock.



You carry the Z400 on your pocket with the deep-carry wire pocket clip. It is located at the end of the handle and is kept in place with the help of the stand-off. You can switch the clip for left-handed use.



## Acta Non Verba Knives


In the Czech Republic Acta Non Verba, or *ANV Knives* produces excellent knives for amazing prices. The designs are carefully thought out and the finish is great. Especially in this price range. You immediately recognize the knives by their sleek designs. Flowing lines and a modern look and feel. Slightly differently from other brands, and therefore unique.



ANV Z400 Sleipner, Linerlock, G10, Z400-004 pocket knife

blade_finish

ANV Z400 Sleipner, Linerlock, G10 Coyote, Z400-005, pocket knife

colour

handedness

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

ANV Z400 Sleipner Linerlock, G10 Olive, Z400-006, pocket knife

ANV Z400 Sleipner Black DLC, Linerlock, G10 Coyote, ANVZ400-007, pocket knife

ANV Z400 Sleipner, Linerlock, G10, DLC, Z400-009 pocket knife

brand

zm_series

expectedRestockDate

legal_agecheck_key

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Ein taktisches… relativ großes Messer… zu einem guten Preis… einziges Mankos die Klinge ist nicht sauber zentriert 

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

ANV Z400 Sleipner, Linerlock, G10, Z400-004 pocket knife

ANV Z400 Sleipner, Linerlock, G10, Z400-004 pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

ANV Z400 Sleipner, Linerlock, G10, Z400-004 pocket knife

ANV Z400 Sleipner, Linerlock, G10, Z400-004 pocket knife

ANV Z400 Sleipner, Linerlock, G10, Z400-004 pocket knife

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

ANV Z400 Sleipner, Linerlock, G10, Z400-004 pocket knife

Related topics